A/Professor Max Guazzato

Secondary Education

1983 High School Certificate at Istituto Colasanti Milan (60/60 maximum score, first in the region of Lombardy, Italy)

1983 Dental Technician Diploma

Tertiary Education

1989 Bachelor in Dental Surgery at University of Milan, Italy (First Class Honours and first in year) - Thesis Research thesis carried out at the Department of Biochemistry of the University of Milan, Italy: “A new testing method for quantitative analysis of Streptococcus Mutants in bacterial culture”.

1992 Residency in Oral Surgery at the University of Milan with final examination (30/30, in National Qualification Examination)

2002 Registration at the Australian Dental Board (Australian Dental Council Examination) - ADEC

2003 PhD in Dentistry (University of Sydney) - Thesis "Mechanical Properties and Microstructure of Selected All-Ceramic Materials and the Influence of Porcelain, SurfaceTreatment and Heat Treatment on Their Flexural Strength." Biomaterials Science, University of Sydney, Prof M. Swain (Supervisor)2006 Fellow of the Royal Australasian College of Dental Surgeon by examination (FRACDS)

2010 Doctor Clinical Dentistry (Prosthodontics) (University of Sydney) - Thesis "Thermal Compatibility of Commercial Veneering Porcelains  with a Zirconia-Based Framework Material for Fixed Prostheses Discipline of Prosthodontics", University of Sydney, Prof Iven Klineberg (Supervisor)

2010 Member of the Royal Australasian College of Dental Surgeon (Prosthodontics) – MRACDS

2012 Fellow of the Pierre Fauchard Academy Scholarships, Awards and Grants

1988-1989 Two-year undergraduate scholarship for merits

2000 IPRS (International Postgraduate Research Scholarship) and IPA (International Postgraduate Award) related to my PhD.

2001 Australian Dental Research Foundation M. Guazzato, MV Swain.Grant for the project “influence of surface treatment on the flexural strength of four all-ceramic materials used in fixed prosthodontics” 

2002 Joan Chong award for Dental Materials (awarded by the International Association Dental Research, ANZ division)

2002 Award for best poster presentation at the Bioceramics 15 international congress (Sydney): “Microstructure of Alumina- and Alumina/Zirconia Glass-Infiltrated Dental Ceramics”

2009 DentSply Award for the best DClinDent presentation at the “Research Day”, University of Sydney: “Influence of thickness and cooling rate on development of spontaneous cracks in porcelain/zirconia structures” 2011 I. Clarke, A. Aquilia, M Guazzato. Award for best research for 2011 at the “Research Day”, University of Sydney

2012 Australian Prosthodontic Society B. Chon, A. Thangavel, I. Klineberg, M. Guazzato - Grant for the project “Wear of enamel opposing zirconia and lithium disilicate restorations” 2013 EVE Ernst Vetter GmbH; M. Guazzato - Grant for the project “Influence of polishing on the low temperature degradation of zirconia”

2013 James Fairfax Postgraduate Award in Oral Rehabilitation has A. Thangavel, B. Chon, I. Klineberg, M. Guazzato. 

2013 The International College of Prosthodontics best poster presentation at the International Meeting in Turin  A. Thangavel, B. Chon, I. Klineberg, M. Guazzato. The effectof different surface finishing procedures of lithium disilicate (IPS e.max) on antagonist enamel wear: an in-vitro study

2013 Australian Dental Research Foundation - S. Chunduru, M Guazzato, I Klineberg. - Grant for the project “The effect of dental laboratory and chair-side polishing on the strength of zirconia after artificial aging: an in-vitro study”

Work Experience

1980 to 1982 Dental technician in the laboratory directed by Prof D. Caprioglio of the University of Modena, Milan

1983 Dental technician in the laboratory of Dr. Barbieri, Milan

1989 to 1994 Contractor in the private surgery of Dr. G. Leghissa, Milan

1991 and 1994 Contractor in the private surgery of Dr. B. Assenza, Milan, A/Prof. Max Guazzato – Curriculum Vitae - 4 - of Milan)

1992 to 1998 Contractor in the private surgery of Dr. D. Di Stefano, Milan (practice restricted to dental implants and prosthodontics)

1992 to 1998 Contractor in the private surgery of SDA Pty, Ltd, Bergamo (practice restricted to dental implants and prosthodontics)

1992 to 1998 Contractor in the private surgery of Dentalnarco, a dayhospital in Trezzano sul Naviglio (practice restricted to dental implants and prosthodontics)

1999 MDSc candidate (research)

2000 to 2003 PhD candidate

2001 Appointed as Associate Lecturer (Restorative) of the University of Sydney (One-year term contract)

2002 to 2004 Associate Lecturer (Fixed Prosthodontics) of the University of Sydney (two-year term contract)

2003 to 2006 Researcher (Honorary position) at the Key Centre for Microscopy and Nanoanalysis of the University of Sydney candidate since 2001)

2006 to 2009 DClinDent candidate

2008 to 2010 Contractor for The Dentist Specialist, a specialist centre directed by Dr. David Roessler

2003 to 2010 Lecturer (Fixed Prosthodontics, part time, step 6) at the University of Sydney

2003 to Present Co-owner of DentArtisans and Pyrmont Dental Specialist

2010 to Present A/Prof. Oral Rehabilitation, University of Sydney

2012 to Present Co-owner MDS Pty Ltd – Dental Laboratory

2014 to Present Co-owner of Southern Highlands Centre of Oral Health

2014 to Present Co-founder of Southern Highlands Dental Institute Professional Associations and Editorial BoardA/Prof. Max Guazzato – Curriculum Vitae - 5 -1991 Programme Co-ordinator of the Scientific Sub-Committee of the 79th Annual World Congress of the International Dental Federation(FDI)

1989 – 1999 Member of the Cenacolo Odontostomatologico (COM, a National Odontostomatological Union consisting of several associations distributed all over Italy)

1992 – 1999 Member of the Italian Dental Association (AIO)

1996 – 1999 Member of the Italian Oral Surgeon Association (SICO)

1992 – 1999 Councillor and national delegate responsible for the organisation and promotion of educational events for COM

1998 – 2000 Member of Scientific Committee of the “Bone System” Pty. Ltd.

2010 – 2014 Member of the editorial board of the journal “Italian Oral Surgery”

2001 – Present active member of the International Association for Dental Research

2000 – Present member of the Australasian Osseointegration Society

2002 – Present reviewer for Dental Materials

2003 – Present member of the Australian Dental Association

2004 – Present member of the Australian Prosthodontic Society

2004 – Present reviewer for the Australian Dental Journal

2006 – Present fellow of the Royal Australasian College of Dental Surgeon

2006 – Present member of Academy of Osseointegration

2006 – Present member of the International College of Prosthodontics

2011 – Present member of the Academy of Prosthodontists

2012 – Present reviewer for the International Journal of Prosthodontics

Military Service

1989-1990 Joined military service in the Dental Department of the MilitaryHospital in Milan

 Publications & Submitted articles

Garg P, Guazzato M, Swain MV: Influence of chair-side surface treatment on the aging sensitivity of dental 3Y-TZP: an in-vitro study. Dental Materials

Clarke I, Aquilia A, Bertassoni LE, Guazzato M, Klineberg I. Surface Roughness of Restoration: A Comparative Analysis of Finishing Techniques. The International Journal of Periodontics and restorative Dentistry, in press

Zhang Z, Guazzato M, Sornsuwan T, Scherrer SS, Rungsiyakull C, Li W, Swain MV, Li, A/Prof. Max Guazzato – Curriculum Vitae - 6 - Q.Thermally induced fractures for core-veneered dental ceramic structures. Acta Biomaterialia 9 (2013) 8394–8402

K. R. Mehzabeen, A. Sureshkumar, A. Thangavel, B. Chong, M. Guazzato, A.J. Ruys, P. C. Boughton. Development of a Novel Biomimetic Dental Wear System. Journal of Biomimetics. Biomaterials & Tissue Engineering 2012:15;23-35.

Guazzato M, Walton RT, Franklin W, Davis G, Bohl C, Klineberg I. Influence of thickness and cooling rate on development of spontaneous cracks in porcelain/zirconia structures”. Australian Dental Journal 2010: 55; 306–310.

M. Guazzato, M. Albakry, L. Quach, M.V. Swain “Influence of Surface and Heat Treatments on the Flexural Strength of Y-TZP Dental Ceramic”. Journal of Dentistry 2005:33;9-18.

M. Guazzato, M. Albakry, L. Quach, M.V. Swain “Influence of Surface and Heat Treatments on the Flexural Strength of a Glass-Infiltrated Alumina/Zirconia- Reinforced Dental Ceramic”. Dental Materials 2005:21;454-463.

M. Guazzato, K. Proos, L. Quach, M.V. Swain “Strength, Reliability and Mode of Fracture of Bilayered Porcelain/Zirconia Ceramics”. Biomaterials 2004:25:5045-5052

M. Guazzato, K. Proos, G. Sara, M.V. Swain “Strength, Reliability and Mode of Fracture of Bilayered Porcelain/Core Ceramics”. The International Journal of Prosthodontics 2004:17(2);142-149.

M. Guazzato, M. Albakry, L. Quach, M.V. Swain “Influence of Grinding, Sandblasting, Polishing and Heat Treatment on the Flexural Strength of a Glass-Infiltrated Alumina-Reinforced Dental Ceramic”. Biomaterials 2004: 25;2153-2160

M. Guazzato, M. Albakry, M.V. Swain, S.P. Ringer “Strength, Fracture Toughness and Microstructure of a Selection of All-Ceramic Materials. Part I: Pressable and Alumina Glass-Infiltrated Ceramics. Dental Materials 2004:20;441-448.

M. Guazzato, M. Albakry, M.V. Swain, S.P. Ringer “Strength, Fracture Toughness and Microstructure of a Selection of All-Ceramic Materials. Part II: Zirconia-Based Dental Ceramics. Dental Materials 2004:20;449-456.

M. Albakry, M. Guazzato, M.V. Swain “Effect of Sandblasting, Grinding and Polishing on the Flexural Strength of Two Pressable All-ceramic Dental Materials”. Journal of Dentistry 2004:32;91-99.

M. Albakry, M. Guazzato, M.V. Swain “Biaxial flexural strength and microstructure changes of two recycled pressable glass ceramics”. J Prosthodontics 2004;13:141-149.

M. Albakry, M. Guazzato, M.V. Swain “Influence of Hot Pressing on the Microstructure and Fracture Toughness of Two Pressable Dental Glass-ceramics”. J Biomed Mater Res Part B: Appl Biomater 71 B: 99-107, 2004.

M. Albakry M. Guazzato, M.V. Swain “Biaxial Flexural Strength, Elastic Moduli, and X-ray Diffraction Characterization of Three Pressable All-Ceramic Materials” The Journal of Prosthetic Dentistry, 2003:89;374-380.

A/Prof. Max Guazzato – Curriculum Vitae - 7 - M. Albakry, M. Guazzato, M.V. Swain “Fracture Toughness and hardness evaluation of three Pressable All-Ceramic Dental Materials” Journal of Dentistry, 2003:31;181-188.

M. Albakry, M. Guazzato, M.V. Swain “Fracture Toughness, Microstructure and Toughening Mechanism of Leucite and Lithium Disilicate Glass Ceramics”. Key Engineering Materials Vols 240-242; 2003: 955-958.

M. Guazzato, M. Albakry, M.V. Swain, S.P. Ringer “Microstructure of Alumina- and Alumina/Zirconia glass-Infiltrated Dental Ceramics”. Key Engineering Materials Vols 240-242; 2003: 879-882.

M. Guazzato, M. Albakry, M.V. Swain, JG Ironside “Mechanical Properties of In-Ceram Alumina and In-Ceram Zirconia” The International Journal of Prosthodontics 2002;15:339-346

M. Guazzato, D. Di Stefano 1998 “Multidisciplinary Treatment for Single Missing Tooth Restored with Dental Implants” Implantologia Orale UTET Publisher, 1 n° 4, 50-54 (Italian)

M. Guazzato G. Leghissa, D. Di Stefano, S. Moretti, 1996 “Protection of Operator and Patient from Cross-Infections: Operating Room” Il Dentista Moderno UTET Publisher, XIV n°1, 29-37 (Italian)

M. Guazzato G. Leghissa, D. Di Stefano, S. Moretti, 1995 “Protection of Operator and Patient from Cross-Infections: Hygiene of the Team” Il Dentista Moderno UTET Publisher, XIII n°9 November, 1401-1412 (Italian)

M. Guazzato G. Leghissa, D. Di Stefano, S. Moretti, 1995 “Protection of Operator and Patient from Cross-Infections: the Use of Barriers” Il Dentista Moderno UTET Publisher, XIII n°10, 1589-1623 (Italian)

D. Di Stefano, M. Longheu, M. Guazzato 1994“Digital X-ray in Dental Surgery” Dental Cadmos, Masson Publisher, 62, 63-68 (Italian)

G. Leghissa, M. Guazzato, V. Stablum, 1993, “ Medications in the Dental Surgery”Assistenza e Prevenzione Dentale, Masson Publisher, 1, 29-36 (Italian)

G. Leghissa, M. Guazzato, M. Longheu 1993 “Microwave Sterilization in Dental Surgery” Il Dentista Moderno UTET Publisher, XI n°1, 27-35 (Italian)

D. Di Stefano, M. Guazzato M. Longheu, 1993 “Digital X-ray in Implantology” Dental Cadmos, Masson Publisher, 61, 82-88 (Italian)

G. Leghissa, M. Guazzato, 1992, “The Nervous System” Assistenza e Prevenzione Dentale, Masson Publisher, 4, 30-36 (Italian)

G. Leghissa, M. Guazzato, 1992, “Mouth Pathology” Assistenza e Prevenzione Dentale, Masson Publisher, 5, 29-36 (Italian)

M. Guazzato, 1991 “Use of Drugs for the Psychological Pain” Medico e Paziente 11, 35-43 (Italian)

Books

Contributor for: Oral Rehabilitation: A case-based approach. Iven Klineberg, Diana Kingston, 2012, Wiley-Blackwell.  A/Prof. Max Guazzato – Curriculum Vitae - 8 -

M. Guazzato, M. Longheu “Drugs in Implantology” in G. Leghissa, G. Grappiolo, B. Assenza 1993 “Operating Protocols in Implantology and Prosthodontics on Implants” USES Publisher

G. Leghissa, S. Moretti, D. Di Stefano, M. Guazzato 1995 “Decontamination, Disinfection and Sterilization: Ergonomic Protocols in Dentistry”. UTET Publisher

Speaker in Continuing Education Meetings

2014 E4D Training Program - Guazzato M., Quach L.: Intermediate Course for E4D Users

2014 Dan Brenner Institute - Guazzato M.: “Risk Analysis in Dental Implants”

2013 The University of Sydney, Continuing Education Program Extended Fixed Prosthodontics - Guazzato M., Quach L.: 1-day workshop on ceramics

2013 1-day seminar: Full-arch implant rehabilitation. Brisbane - Guazzato M.: “The dark side of dental implants: rationalisation of failures and risk analysis”. Guazzato M: “Implant Supported Full Arch Zirconia-Based Fixed Prostheses. Considerations on Materials, Procedures and Prosthesis Designs”.

2013 Digital Dentistry Symposium. Bangkok, Thailand - Guazzato M., Quach L. Half a day workshop: “Digital dentistry: beyond the basic”, “Shape and shade”, “MasterPrep”.

2013 Digital Dentistry Symposium. Bangkok, Thailand - Guazzato M., Quach L. Half a day workshop: “Digital dentistry: beyond the basic”, “Shape and shade”, “MasterPrep”.

2013 Digital Dentistry Symposium. Bangkok, Thailand - Guazzato M. Presentation: “Making your ceramic restorations last: tips and tricks.

2013 The University of Adelaide, Continuing Education Program - Guazzato M. ”The Pathway to Clinical Excellence in Chair-Side Ceramic Restorations

2012 Charles Sturt University, Sydney, Australia. Lecture for Diploma in Dental Implants - Guazzato M.: “Implant-supported full arch zirconia-based prostheses: consideration on material, procedures and prosthesis design ”. Half a day seminar.

2012 Australian Dental Association, Sydney, Australia. A/Prof. Max Guazzato – Curriculum Vitae - 9 - Guazzato M: “How to introduce dental implants in you practice and still sleep soundly?” Presentation.

2012 Australian Dental Association, Sydney, Australia - Guazzato M.: “Communication dentist and dental laboratory”. Presentation.

2012 Quintessence Symposium, Sydney, Australia - Guazzato M., Quach L.: “The pathway to clinical excellence in chairside ceramic restorations”. 1-day hands-on workshop.

2012 Quintessence Symposium, Sydney, Australia - Guazzato M.: “Implant-supported full arch zirconia-based prostheses: consideration on material, procedures and prosthesis design ”.

2012 The University of Sydney Continuing Education Programme: Extended Fixed prosthodontics, Sydney, Australia - Guazzato M: “Key factors for Clinical Success with All Ceramic Inlays and Crowns”.1-day hands-on workshop.

 2012 Hamilton Island (Australia). Digital Dentistry Symposium - Guazzato M.: “Dental ceramics: history developments, success and failures”; Guazzato M: “Surface preparation of E4D – Ivoclar ceramics for successful clinical outcome”

2012 Cairns (Australia). Meeting of the Academy of Australian and New Zealand Prosthodontists - Guazzato M.: “Dental ceramics: past, present and future”.

2012 Baden-Baden (Germany). Meeting of the YPE-ICP (Young Prosthodontists Educator of the International College of Prosthodontist) - Guazzato M.: “Is Zirconia-Based Implant-Supported Fixed Prosthesis a Suitable Treatment for Edentulous Patient ?”

2012 Auckland (New Zealand). Nobel Biocare CE programme - Guazzato M.: “From A to Zirconia: things you need to know about zirconia”.

2012 Wellington (New Zealand): Meeting of the New Zealand Association of Prosthodontists and Restorative Dentists - Guazzato M.: “All-ceramic materials: the truth nothing but the truth”; Guazzato M: “Implant-supported full arch zirconia-based prostheses: consideration on material, procedures and prosthesis design”.

2012 “Master Classes” National Conference, Sydney (Australia) - A/Prof. Max Guazzato – Curriculum Vitae - 10 - Guazzato M.: “Implant-supported full arch zirconia-based prostheses: consideration on material, procedures and prosthesis design”.

2011 Australian Prosthodontic Society, Brisbane (Queensland-Australia) - Guazzato M: “Implant-supported full arch zirconia-based prostheses: consideration on material, procedures and prosthesis design”.

2011 The University of Sydney Continuing Education Programme: Extended Fixed prosthodontics, Sydney, Australia - Guazzato M.: “Key factors for Clinical Success with All Ceramic Inlays and Crowns”. 1-day hands-on workshop.

2011 The National Meeting of the Australian Prosthodontic Society, Coolum (Queensland-Australia) - Guazzato M.: “A gossip/evidence-based talk on: Zirconia vs. Lithium disilicate, who is the winner?”.

2010 Kiama (Australia) International Association Dental Research (Annual Scientific Meeting) - Guazzato M.: “Zirconia: an update on clinical outcomes and in vitro studies”

2010 Oceania International Implant Congress, Sydney 2010 - Guazzato M.: “Implant supported full arch zirconia-based fixed prostheses. Surgical and restorative considerations”.

2009 “Research Day”, University of Sydney: “Influence of thickness and cooling rate on development of spontaneous cracks in porcelain/zirconia structures”. Guazzato M, Walton RT, Franklin W, Davis G, Bohl C, Klineberg I.

2006 Presentation – Australasian Osseointegration Society - Guazzato M. “Zirconia: why should we change?” Sydney

2006 Congress of the Australasian Academy of Prosthodontics: Guazzato M. “The Era of Zirconia” Sydney

2006 Congress of the Australasian Academy of Prosthodontics: M. Guazzato, I. Ichim, N. Waddell & M. Swain: “CAD-CAM ceramics" Sydney

2006 Continuing Education Programme (University of Sydney): Extended Fixed Prosthodontics including Cerec, Veneers and Implants. Several presenters. University of Sydney - Sydney

2005 Conference - European Ceramic Society - Guazzato M, Ichim I and Swain M V. “Advanced Dental Ceramics: Are They Appropriate?” A/Prof. Max Guazzato – Curriculum Vitae - 11 - Portoroz (Slovenia)

2004 Continuing Education Programme – University of Geneva Guazzato M: “An overview on materials, systems, clinical indications, clinical outcomes, mechanical properties and microstructure of all-ceramic materials” University of Geneva – Geneva (Switzerland)

2003 Poster presentation - Guazzato M, Albakry, Swain MV: “Influence of Grinding, Sandblasting, Polishing and Heat Treatment on the Flexural Strength of a Glass-Infiltrated Alumina-Reinforced Dental Ceramic” Goteborg (Sweden) IADR 81th International Congress.

2003 Poster presentation - Albakry, Guazzato M, Swain MV: “The effect of sandblasting, grinding, polishing and glazing on the flexural strength of two pressable all-ceramic dental materials” Goteborg (Sweden) IADR 81th International Congress.

2003 Presentation - Guazzato M:“An overview on materials, clinical applications and mechanical properties of all-ceramic materials” Dunedin (New Zealand) Research Report at the University of Otago

2002 Poster presentation - Albakry M, Guazzato M, Swain MV, “Mechanical Properties Evaluation of Three Pressable All-Ceramic Dental Materials San Diego (USA) IADR 80th International Congress.

2002 Presentation - Guazzato M, Albakry M, Ringer PS, Swain MV: “Strength, Fracture Toughness and Microstructure of Zirconia-Based Dental Ceramics” Sydney (Australia) IADR (ANZ Division) 42nd Annual Scientific Meeting.

2002 Presentation - Guazzato M, Albakry M, Swain MV “The Effect of Heat-Pressing on the Fracture Toughness of Two Pressable All-Ceramic Dental Materials” Sydney (Australia) IADR (ANZ Division) 42nd Annual Scientific Meeting.

2002 Poster Presentation - Guazzato M, Albakry M, Swain MV “Microstructure of Alumina- And Alumina/Zirconia Glass-Infiltrated Dental Ceramics” Sydney (Australia) Bioceramics 15 International Congress.

2002 Poster presentation - Albakry M, Guazzato M, Swain MV “Fracture Toughness Microstructure and Toughening Mechanism of Leucite and Lithium Disilicate Glass-Ceramics” A/Prof. Max Guazzato – Curriculum Vitae - 12 - Sydney (Australia) Bioceramics 15 International Congress.

2002 Presentation - Swain MV, Guazzato M, Albakry M, Ironside J. “Dental Ceramics: New Materials Developments and Technology” Sydney (Australia) Bioceramics 15 International Congress.

2001 Presentation - Guazzato M, Albakry M, Ironside J, Swain MV: “The Mechanical Properties of Alumina In-Ceram and Zirconia In-Ceram”. Chiba (Tokyo) IADR 79th International Congress.

1998 Presentation – Guazzato M. “Application of Metal-Free Materials in Implantology”. COM, Novara (Italy)

1998 Presentation – Guazzato M. “Relevance of the Surgical Protocol in Preventing Failures in Implantology” National Congress. “11th Milanese Day of Implantology“ , Milan (Italy)

1997 Presentation – Guazzato M. “Application of Metal-Free Materials in Fixed Prosthodontics: Outcomes of Mechanical Tests and SEM Observations” COM National Congress organized by COM, University of Milan, University of Genoa, University of Florence, University of Brescia, Italian Society of Oral Surgery and Italian Dental Council, Milan (Italy)

1997 Two-day workshop. Guazzato M. Ruggeri M. “Prevention and Treatment of General Complications in Dental Practice”. Organized by COM and Red Cross Italy, Milan (Italy)

1996 Presentation – Guazzato M. “Extraction of the Lower Impacted Third Molars:” National Congress. 2nd Congress of Implant and Oral Surgery organized by COM, Italian Dental Association, and Italian Dental Council, Monza (Italy)

1996 Presentation – Guazzato M, Longheu M. Di Stefano D. “Drugs Used in Surgery and Implantology”. COM, Vittorio Veneto (Italy)

1996 Presentation – Guazzato M. “Prevention of Cross Infections: Surgeon and Operating Room” National Congress. 1st Congress of Preventative Dentistry organized by COM, Milan (Italy) A/Prof. Max Guazzato – Curriculum Vitae - 13 -

1996 Two-day workshop – Guazzato M, Roccasalva N. “Prevention and Treatment of General Complications in Dental Practice”. Organized by COM and Red Cross Italy, Milan (Italy)

1996 Presentation. Guazzato M. Longheu M. Di Stefano D. “Drugs Used in Oral Surgery and Implantology” COM, Milan (Italy)

1995 Presentation – Guazzato M. Di Stefano D. “The Maxillary Sinus Augmentation: Indications, Techniques and Histology” National Congress. 1st day of Implant Surgery – organised by COM,Italian Dental Association and Italian Dental Council, Monza (Italy)

1995 Presentation - Guazzato M. “Use of Ceramics and Composites for Implant-Supported Fixed Prostheses” Organised by COM, Italian National Dentistry Association at the Faculty of Medicine of the University of Milan, Milan (Italy)

1995 One-day workshop for dental hygienists – Guazzato M. “ The use of scalers and curettes” COM, Milan (Italy)

1994 Two-day Workshop - Guazzato M. Di Stefano D. Leghissa G. “Introduction to Oral Implantology: Systems and Techniques”, COM Trezzano Sul Naviglio (Italy)

1994 One-day workshop – Guazzato M. Di Stefano D. “Prevention and Treatment of Cardiovascular Complication in Dental Practice”, COM, Italian Dental Association, Genoa (Italy)

1994 Presentation – Guazzato M. “Infectious Diseases: Prevention of Cross-Infections” COM, Milan (Italy)

1994 Workshop – Guazzato M. “Prevention of Cross-Infection: Surgeon and Operating Room”. COM, Monza (Italy)

1993 Workshop – Guazzato M. Longheu M. Di Stefano D. “Drugs in Implantology and Oral Surgery” Organized by COM, Italian National Dentistry Association at the Faculty of Medicine of the University of Milan, Milan (Italy)

1993 Presentation – Longheu M. Guazzato M Di Stefano D “Application of digital x-rays in implantology” National Congress. “Milanese Day in Implantology”. Milan (Italy) A/Prof. Max Guazzato – Curriculum Vitae - 14 -

1993 Presentation – Guazzato M. Longheu “Drugs in Implantology”, COM Conference Milan (Italy)

1993 Presentation – Guazzato M. “Prevention of Cross-Infections: Handling and Sterilisation of the Instruments” COM Conference, Monza (Italy)

1991 Presentation – Guazzato M. “Pain and Anxiety Control”. 3rd National Congress. Ambrosial Symposium in Medicine and Dentistry, Milan (Italy)